|
In engineering, shear strength is the strength of a material or component against the type of yield or structural failure where the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force. When a paper is cut with scissors, the paper fails in shear. In structural and mechanical engineering, the shear strength of a component is important for designing the dimensions and materials to be used for the manufacture or construction of the component (e.g. beams, plates, or bolts). In a reinforced concrete beam, the main purpose of reinforcing bar (rebar) stirrups is to increase the shear strength. For shear stress applies : where : is major principal stress and : is minor principal stress. In general: ductile materials (e.g. aluminium) fail in shear, whereas brittle materials (e.g. cast iron) fail in tension. See tensile strength. To calculate: Given total force at failure (F) and the force-resisting area (e.g. the cross-section of a bolt loaded in shear), ultimate shear strength () is: : ==Comparison== As a very rough guide relating tensile, yield, and shear strengths:〔http://www.roymech.co.uk/Useful_Tables/Matter/shear_tensile.htm〕 USS: Ultimate Shear Strength, UTS: Ultimate Tensile Strength, SYS: Shear Yield Stress, TYS: Tensile Yield Stress When values measured from physical samples are desired, a number of testing standards are available, covering different material categories and testing conditions. In the US, ASTM standards for measuring shear strength include ASTM B831, D732, D4255, D5379, and D7078. Internationally, ISO testing standards for shear strength include ISO 3597, 12579, and 14130.〔S. Grynko, "Material Properties Explained" (2012), ISBN 1-4700-7991-7, p. 38.〕 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「shear strength」の詳細全文を読む スポンサード リンク
|